https://jbs3dpartfactory.com/improved-upside-down-ams-lite-dry-box/

23 February 2025 Update:
I've added number plaques that press into the triangular holes in the tray mount.  Please note that in order to use these plaques you need to:
1. Color in the numeric portion with a different color than the body of the plaque
2. Flip it over (so the number faces down) before printing

I also made a slight change to the tray mount so that the number plaques snap in nicely



The following parts are used to build the Improved Upside Down AMS Lite dry box:

(4) M3 x 14mm screws
(4) M3 washers
(4) M3 nuts
(1) 3D printed cable escutcheon (bolt and nut)
(1) 3D printed AMS Lite support
(1) 3D printed desiccant tray mount
(1) 50L Ezy Storage Drybox (Walmart, Home Depot, Target)
(4) 40mm x 13mm neodium bar magnets
(1) 9 inch x 13 inch x 1 inch cookie sheet

(1) 19mm hole drill bit
(1) 5/32 drill bit
(1) 1/8 drill bit


To print the tray mount, support, and number plaques:

PLA or PETG
0.2mm layer height
3 perimeters
20% grid infill


To print the escutcheon bolt and nut:

PLA or PETG
0.12mm fine layer height
2 perimeters
15% gyroid infill


If you would like to build the stand you'll need:

(2)	2x3x8 lumber

Cut into the following:

(2) 20 inch pieces
(4) 23 inch pieces
(4) 8  inch pieces